Sub-zero PRO 48 Manuel d'utilisateur télécharger pdf (Page 12)

12

Removing the grille

R

EMOVING THE

G

RILLE

I

n order to prevent damage to the grille, the

top grille assembly should be removed prior

to moving the unit.

T

o remove the grille assembly, pull out on the

bottom edge of the grille and tilt the grille

frame forward. Disconnect the low-voltage

c

able which connects the exterior temperature

displays on the grille to the display module,

and cut the two white cable ties which attach

the network cable to the right grille support.

These cables ties should be replaced once the

unit is properly installed with the extra cable

ties provided in this package. Remove the

three 11 mm bolts from base of the grille.

Remove the screw from the upper grille area to

remove the grille assembly. Refer to the illus-

tration below.

ANTI-TIP BRACKET

INSTALLATION

Anti-tip bracket alignment

ANTI-TIP HARDWARE INCLUDED

1

2 12 x 63.5 mm PN HD

Wood Screw 6201190

3 9,52 mm x 95,25 mm

Trubolt Anchor 6110620

1

2 #12 flat washer 6240040

3 #8–18 x 31,75 mm

AB PH HD Screw 6201520

3 Nylon Zip-It Wall Anchor 6160390

PRO 48 INSTALLATION INSTRUCTIONS

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 75 76

Commentaires sur ces manuels

Pas de commentaire