Sub-zero PRO 48 Manuel d'utilisateur télécharger pdf (Page 18)

PRO 48 INSTALLATION INSTRUCTIONS

DOOR ADJUSTMENT

DOOR HINGE ADJUSTMENT

The door must be removed to adjust door

hinges. To remove the door, lift up the vent

ortion of the top grille, open the door to

about 45° and lift the door off the cabinet

hinges. Remove the hinge pins.

Loosen the two door hinge fasteners, slide

hinge to the desired position and retighten the

fasteners. Refer to the illustrations below. Rein-

stall hinge pins and door. Check alignment and

door seal. Close the vent portion of the top

grille.

Door hinge adjustment Door hinge adjustment

When adjusting cabinet and door hinges,

it is important to keep the hinges parallel

to the face of the door and side of the

cabinet. The door switch will not function

if the hinges are excessively misaligned,

which will cause the lights to stay on and

he fan to not operate. This will result in

elevated cabinet temperatures. After

hinge adjustments are made, check that

the door switch is functioning properly.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 75 76

Pas de commentaire

Sub-zero PRO 48 Manuel d'utilisateur Page 18